Friday, September 23, 2011

Pressing clutch down on 2007 Saturn Ion causes disturbing squeak noise. How can I lube it to stop the noise?

The car is fantastic otherwise, but the dry rubbing sound makes me nuts. It has the same sound when letting up the clutch. Car still has 6K left on full warranty, but dealer is not anxious to disassemble under the dashboard just to stop the noise. And I do not blame him. I tried spraying WD40, but almost impossible to get the spray unto the noisy part. Is there any other solution besides demanding that dealer take car apart and apply grease?Pressing clutch down on 2007 Saturn Ion causes disturbing squeak noise. How can I lube it to stop the noise?Ouch!! The noise must be annoying!



If the noise is coming from the clutch pedal joint in the car I would recommend a product I which I represent. The product is called Jig-a-Loo and its main selling feature is that it is non-greasy, silicone-based product which doesn檛 stain or stink.

Jig-a-Loo lubricates and eliminates squeaks. Just spray some on your pedal joint with the help of the little straw!



Otherwise, if the noise is coming from the clutch cable mechanism in transmission... I think it is garage time!!



If you want to know where you can find it, click on http://www.jigaloo.com/ca/e_store_locator.php



I hope it helps!Pressing clutch down on 2007 Saturn Ion causes disturbing squeak noise. How can I lube it to stop the noise?Its either the pedal pivot or the release bearing slide, and if its inaccessible, then the only way to lube it is to dig down to it.Pressing clutch down on 2007 Saturn Ion causes disturbing squeak noise. How can I lube it to stop the noise?Is it possibly a more serious problem like a throwout bearing ? is the noise present all the time your foot is on the clutch or does it go away.Pressing clutch down on 2007 Saturn Ion causes disturbing squeak noise. How can I lube it to stop the noise?the throw out bearing has failed.. you have to pull the transmission to replace it... noting is going to help.. go to the dealer and have this done now... this job can cost up to 1000 dollars ..ok..http://www.vw-resource.com/bearing.html

read this i may have confused you .this will give you know how. ok demand that it gets changed grease will not cure this.. and probably a different kind will be required this is a failure of the manufacturer defective parts..
  • hairdresser using my own colour
  • vc
  •